ขาย DBX 1046 คอมเพรสเซอร์ ขนาด 4 ชาแนล พร้อมภาค Limite สภาพดีมากFeaturesFour independent channels of operation, stereo linkable in two pairsPeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settingsIndependent Threshold and ratio controlsSwitchable OverEasy® or Hard Knee compressionClassic dbx® compressionDifferentially balanced gold-plated XLR and 1/4" inputs and outputsTrue RMS level detectionPrecision metering of input level, output level, and gain reductionDual True stereo or quad mono operationSwitchable +4dBu or -10dBV operation per channel......................SpecificationsInput Connectors XLR and 1/4" TRS (Pin 2 and tip hot)Input Type Electronically balanced/unbalanced, RF filteredInput Impedance Balanced > 40 kOhm, unbalanced >20 kOhmMax Input > +22 dBu balanced or unbalancedCMRR Typically >50 dB at 1 kHzOutput Connectors XLR and 1/4" TRS (Pin 2 and tip hot)Output Type Servo-balanced/unbalanced, RF filteredOutput Impedance Balanced 30 Ohm, unbalanced 15 OhmMax Output > +22 dBm balanced, > +20 dBm unbalancedBandwidth 20 Hz to 20 kHz, +0/-0.5 dBFrequency Response 0.35 Hz to 90kHz, +0/-3 dBNoise < -96 dBu, unweighted, 22 kHz measurement bandwidthDynamic Range > 118 dB, unweightedTHD+Noise >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHzIMD < 0.1% SMPTEInterchannel Crosstalk < -80 dB 20Hz to 20 kHzStereo Coupling True RMS Power SummingCompressor Threshold Range -40 dBu to +20 dBuCompressor Ratio 1:1 to infinity:1Compressor Threshold Characteristic Selectable OverEasy® or hard kneeCompressor Attack/Release Characteristic AutoDynamic™Compressor Attack Time Program-dependentCompressor Release Time Program-dependentCompressor Output Gain -20 to +20 dBLimiter Threshold Range 0 dBu to +24 dBu (off)Limiter Ratio infinity:1Limiter Type PeakStopPlus® two-stage limiterLimiter Stage 1 PeakStop® brickwall limiterLimiter Stage 1 Attack Time ZeroLimiter Stage 1 Release Time ZeroLimiter Stage 2 Predictive intelligent program limiterLimiter Stage 2 Attack Time Program-dependentLimiter Stage 2 Release Time Program-dependentOverEasy® Switch Activates the OverEasy compression functionI/O Meter Switch Switches between monitoring input and output levels on the Input/Output Level meterBypass Switch Activates the direct input-to-output hard-wire bypassOperating Level Switch (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levelsST Link Switch Links channels in stereo pairs. Channels One and Three become the master channelsGain Reduction Meter 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dBI/O Meter 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBuPeakStop™ Indicator 1 LED to indicate PeakStop™ limitingFunction Switches LED indicator for each front-panel switchOutput Transformer Options Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbxOperating Voltage Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 HzPower Consumption 20 WattsFuse 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type TPower Connector IEC receptacleDimensions 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)Unit Weight 5.2 lbs. (2.4 kg)Shipping Weight 7.6 lbs. (3.5 kg)..............................สนใจโทร 089 9877478อ่านเพิ่มเติม